Item
Item No.
Description
Quantity
EverlockTM 1.5"
h-elock
Positive locking regulator with 1.5" standoff bracket
EverlockTM 2"
h-elock2
Positive locking regulator with 2" standoff bracket
TwistlockTM 1.5"
h-150
Hand-twist locking regulator with 1.5" stand-off bracket
TwistlockTM 2"
h-200
Hand-twist locking regulator with 2" stand-off bracket
TwistlockTM 2" (stainless steel)
h-200ss
Hand-twist locking regulator with 2" stand-off bracket
TwistlockTM 2" (aluminum)
h-200a
Hand-twist locking regulator with 2" stand-off bracket
TwistlockTM Flat
h-102
Hand-twist locking regulator with built-in bushing
Snap-In BushingTM
b-snap3/8
Snap-in bushing for 3/8" bar
Long Snap-In BushingTM
b-long
Longer Snap-in bushing for 3/8" bar used with lined duct
1/2" Snap-In BushingTM
b-snap1/2
Snap-in bushing for 1/2" bar for use with larger blades & rectangular blades
Open Ended Clip-On BushingTM
b-300
Clip-on bushing for 3/8" bar (open ended, with e-clip + washer)
Closed Ended Clip-On BushingTM
b-330
Clip-on bushing for 3/8" bar (closed ended, with e-clip + washer)
U-Channel 3/8"
u-c3/8
U-Channel to allow for easy attachment of rectangular or larger blades to 3/8" bar (use two U-Channels per bar)
U-Channel 1/2"
u-c1/2
U-Channel to allow for easy attachment of rectangular or larger blades to 1/2" bar (use two U-Channels per bar)
Round 4" Blade
rd04/bar
Continuous-Bar BladeTM 4" (stackable, with built-in channel for bar)
Round 5" Blade
rd05/bar
Continuous-Bar BladeTM 5" (stackable, with built-in channel for bar)
Round 6" Blade
rd06/bar
Continuous-Bar BladeTM 6" (stackable, with built-in channel for bar)
Round 7" Blade
rd07/bar
Continuous-Bar BladeTM 7" (stackable, with built-in channel for bar)
Round 8" Blade
rd08/bar
Continuous-Bar BladeTM 8" (stackable, with built-in channel for bar)
Round 9" Blade
rd09/bar
Continuous-Bar BladeTM 9" (stackable, with built-in channel for bar)
Round 10" Blade
rd10/bar
Continuous-Bar BladeTM 10" (stackable, with built-in channel for bar)
Round 12" Blade
rd12/bar
Continuous-Bar BladeTM 12" (stackable, with built-in channel for bar)
Round 14" Blade
rd14/bar
Continuous-Bar BladeTM 14" (stackable, with built-in channel for bar)
Round 16" Blade
rd16/bar
Continuous-Bar BladeTM 16" (stackable, with built-in channel for bar)
Square Bars
bar3/8
Please select whether you would like 3/8" aluminum bars pre-cut to size for all your damper blades
YesNo

(*) Please make sure you complete required fields.